Providing exceptional service since 1987
Sterling Pool Service Small Logo

Recent Jobs For Sterling Pool Service

June 21, 2017 | Wylie, TX

We removed the equipment from the pad and replaced the equipment pad. We re-installed the pool pump and cleaner pump, as well as new Pentair 28 sf. DE filter.

June 21, 2017 | Murphy, TX

Upon arrival, we re-tiled his pool and spa with a blue cobalt tile.

June 20, 2017 | Rowlett, TX

Our technician found that the skimmer's wire door was stuck. A twig had lodged in it, preventing the rainwater from flowing into the skimmer through the cool equipment system. Once repaired, everything worked properly.

June 18, 2017 | Allen, TX

Upon arrival, our technician realized the repair actually was much easier. We just re-plumbed the pool pump discharge.

June 11, 2017 | Plano, TX

We installed a Jandy salt system which included a control box, salt cell with cables, check valve, and 10 bags of salt.

June 8, 2017 | Dallas, TX

After several weeks without attention, the pool was dark green. We cleaned the pool and shocked it with granular, filled the floating chlorinator, and applied special chemicals and adjusted the normal swimming pool chemicals. Everything is now clean and clear.

June 8, 2017 | Sachse, TX

A quick inspection showed the pool pump motor had seized. We installed a new pool pump motor, seal and gasket. All is working well now.

June 7, 2017 | Sachse, TX

When we arrived, we discovered that indeed it was a capacitor for the pool pump and we replaced it. Ever since, the pool has run just fine.

June 6, 2017 | Garland, TX

After checking the chlorinator, we confirmed the customer's initial diagnosis. A new one was installed and the pool is running as intended.

June 5, 2017 | Richardson, TX

When we arrived, we discovered he was using a cartridge filter. In the Greater Dallas area, a DE filter is preferred because of soil conditions. He had an 80 square-foot cartridge filter which we replaced with a new 60 square-foot filter and backwash valve. He was very pleased as it was actually ...

June 4, 2017 | Garland, TX

After completing the clean, we informed him that the next filter clean would require new filter cartridges and a tank O-ring. For now, the filter is running properly.

June 2, 2017 | Dallas, TX

We found the pump basket was full of leaves. After we emptied the basket, everything worked as intended. It is critical to empty your skimmer baskets and pump pot baskets as needed, particularly after storms and for pools located near trees. Sometimes this can be two or three times a ...

June 2, 2017 | Richardson, TX

Because he had a sand filter, we had to remove the sand from the filter before we were able to do the repair. We removed 300 pounds of sand and did the filter repair and the pool system works as intended.

May 31, 2017 | Wylie, TX

After several follow-ups, we did not hear back from her.

May 30, 2017 | Dallas, TX

We bid a new one, which they approved. We installed the new sweet pump a couple of days later.